Read this article to learn more about using the Cisco SIP/H.323 conference room system (with a touchscreen control unit) to join Lark video meetings through the Lark SIP/H.323 Cloud Room Connector and how to perform in-meeting operations.
250px|700px|reset
I. Applicable devices
Series | Model |
DX series | DX 80/DX 70 |
II. IP address
We recommend using the IP address corresponding to the location of the SIP/H.323 meeting room system.
Chinese Mainland | |
Europe and Americas | |
Southeast Asia |
III. Join a meeting
The following steps use the Cisco DX80 as an example.
1. Quickly join a meeting via the Lark extension (Recommended)
With the Lark extension, you can simply call the Lark meeting ID on your Cisco device to join a meeting.
Join a meeting
- On the touchscreen control unit, tap Join Lark where you'll be taken to a page that lets you enter the Lark meeting ID.
- Enter your Lark meeting ID and tap Call.
250px|700px|reset
- You will join the meeting once the call goes through.
Install and uninstall the Lark extension
Cisco CE version devices equipped with a touchscreen can install the extension for free (for example: Cisco Touch 10 or Cisco Webex Rooms Navigator).
To install:
Method 1: Install via commands
- As the terminal administrator, log in to the terminal's webpage and go to Integration > Developer API in the navigation bar.
- In the Developer API command box, enter the command to install the SIP version of the Lark extension.
- Enter xCommand Provisioning Service Fetch Mode: Replace URL: https://lf3-static.bytednsdoc.com/obj/eden-cn/upipogbpu/lark_join.zip and tap Execute.
250px|700px|reset
- If the installation is successful, the terminal interface will have a newly added Lark button.
250px|700px|reset
Note: Only version CE 9.15.3 and above can display the Lark logo.
Method 2: Install via uploading the installation package.
- As the terminal administrator, log in to the terminal's webpage, and go to Maintenance > Backup and Restore in the navigation bar.
- Select Restore backup. Under Upload backup, select the downloaded extension installation package and upload it.
- If the installation is successful, the terminal interface will have a newly added Lark button.
250px|700px|reset
250px|700px|reset
Uninstall:
- As the terminal administrator, log in to the terminal's webpage and go to Integration in the navigation bar.
- Delete UI Extensions and Macro, then in Setup/Personalization, delete Brand Logo.
2. Basic methods to join a meeting
Join by calling the meeting ID@IP address/domain
On the touchscreen, tap Call and enter the meeting ID@IP address/domain. You will join the meeting once the call goes through.
Steps:
- On the touchscreen, tap Call where you'll be taken to the calling page.
- Enter the meeting ID@IP address or meeting ID@lvc.larksuite.com (For example: 123456789@ 3.235.69.157 or 123456789@lvc.larksuite.com ), then tap Call.
250px|700px|reset
- You will join the meeting once the call goes through.
Join by calling the access IP/domain
On the touchscreen control unit, tap Call and call the IP address or the domain lvc.larksuite.com. Once the call goes through, you'll enter Lark's welcome page. Enter the 9-digit meeting ID and press # to join the meeting.
Steps:
- On the touchscreen control unit, tap Call where you'll be taken to the calling page.
- Enter the IP address or the domain lvc.larksuite.com and tap Call.
250px|700px|reset
- Once the call goes through, you will see Lark's welcome page.
250px|700px|reset
- On the touchscreen control unit, tap Keypad and enter the Lark meeting ID. Then, tap # to join the meeting.
250px|700px|reset
Ⅳ. In-meeting operations
- On the touchscreen control unit, tap Keypad and then tap 1 to display the menu.
250px|700px|reset
250px|700px|reset
- In the menu, you can view the meeting ID and perform the following operations:
- Tap 1 to change the video layout. There are three layouts available: Gallery, thumbnail, and speaker.
- Tap 2 to turn your microphone on/off.
- Tap 3 to turn your camera on/off.
- Tap 4 to display or hide your camera layout and set whether you want to see your own video.
- Tap 5 to turn acoustic mode on or off.
- Tap 6 to show or hide non-video participants.
- Tap 0 to switch the language for voice and image tips. Currently, Simplified Chinese and English are supported.